SEWAGE SANITARY TANKER-SUCTION ECOTAOS

SYSTEM OF USE AND COMMANDS

ATMOSPHERIC TANK

Equipment mounted on chassis truck 4x2, 6x2, 6x4, or drag system. Adequate ground load capacity and minimum equipment weight, for the maximum payload transported.

Atmospheric tank with vacuum suction system specially designed for collection / drainage of sewage, septic tanks, oil tanks, etc.
The storage is made in steel tank with 3 "cargo inlet.
Discharge by gravity with angulation of the tank if it is on a roll off equipment, or by internal pressure of air in tank, reversing the cycle of suction to discharge.

Pneumatic commands from truck cab for PTO drive and mechanical commands for suction and discharge operation.

CONSTRUCTION AND CAPACITIES

Designed for capacities from 16 to 30m³.
Constructed of 1/4 "(6.4 mm) thick carbon steel sheet, cylindrical, electrically welded inside and out (double seam). Conical shaped heads of the same thickness. Lower crossbars as a base structure. It has transverse breakwaters made of sheet steel from 3.2mm (1/8 "), which give the robustness necessary to withstand the stresses generated by the moving liquid.
2 1/2 "or 3" load input. Mouth entry step man with diameter 500mm. Cleaning and drainage mouth 300 mm in diameter on the back head. Hermetically sealed caps.
Handrail handrails at the top of the tank and stairs for easy access.
Hose holder on both sides, fender in stainless steel type American.

SUCTION AND ENERGIZATION

SUCTION SYSTEM
The suction system operates with a vacuum pump of 1600 / 2000Lts / min at 900 / 1200rmp and 5.5 / 7.5 HP consumed power.

ENERGIZATION
Depending on your computer configuration, you use one of the following power sources.
- Power take-off connected to the truck's gearbox and linked to "v" pulleys and belts to obtain the necessary RPM.
- Hydraulic motor linked to a hydraulic pump by means of hoses with quick coupling at its ends.
-Electric motor.
-Motor to exploit
- Transmission tree system.

 

SURFACE TREATMENT

Degreasing, pickling and phosphatizing.
Exterior painted with two hands of common epoxy, anticorrosive and double application of polyurethane paint, color to choose the client

OPCIONAL

  • botonVisors of load level type of porthole.
  • botonAnti-spill trays in each man step entrance.
  • botonTool drawer with lid and lock in stainless steel.
  • botonWater tank washes hands of 25 liters capacity.
  • botonRear anti-slip feet.
descarga

CONSULTATIONS FOR THIS PRODUCT

WRITE US, CONTACT US THROUGH THE FOLLOWING FORM AND WE WILL RESPOND YOU AS SOON AS POSSIBLE

CONTACT

OFFICE, PRODUCTION AND SALES
Córdoba-Rosario Km 628,5 highway
5986 Oncativo Córdoba
Phone: +54 3572 462665 ROT.
TECHNICAL SERVICE IN BUENOS AIRES
Dr. Alfredo Palacios 4572 - B1826BLB
Valentín Alsina- Buenos Aires
Phone: +54 11 4228 3096