ECOD 7000

Usage system

Washing and tracing of sewage, rainwater and industrial pipes.

Mounted on 4x2 truck and powered by truck engine.

Equipment suitable for the cleaning, washing and tracing of sewage, rainwater and industrial pipes, by means of a high pressure hose and flow; Sleeve with controlled pressure and flow rate, suitable for general washing with an adjustable jet /fan.

It has perimeter spaces located on both sides of the unit, low chassis level, suitable for save accessories such as tools, nozzles, washer lance, safety cones, hydrant, hoses, etc. Sectors open for access to bodies and accessories belonging to the truck and equipment, closed areas with vertical metal fence doors with gas - spring load compensators, locks and keys.
Metal rear fenders with anti-spray rubber screens.
Regulatory rear bumper, vertical fender to avoid interfering in the discharge and operation of the equipment.

CONSTRUCCION AND CAPACITIES

Base structure: structural frame, fixed to the chassis truck that works as a base for the integration of the equipment.

Front sector: the water pump assembly is located with its peripherals and the hydraulic oil tank.

Medium sector: from the middle sector and until the end is located the water tank.

Rear sector: In this sector are grouped the auxiliary accessories, such as the washing sleeve and its hose guard and commands of enabling and regulation; at the end the retractable regulatory bumper

Sector under structure: are distributed in the lateral ones under the structure, the double fenders with screens anti-spray of the rear rolling, the drawers keeps objects with vertical swinging doors with gas - spring system and with locks with key; from the front end and to the drawers is a perimeter security guard and access stairs to the upper platform.

Water tank: 1 tank, fully built in polyethylene rotomolded with breakwaters, total capacity 7000 lts. Loading mouth: a top Ø 400 mm with lid. Return: entrance in Ø 1 "(25.4 mm) for return pressure regulator of washing, connected in rear tank.

ENERGIZATION AND HYDRAULIC SYSTEM

Own motor of the base truck to energize pump. Required working power of truck engine: 89hp available to feed water pump.

POWER SUPPLY
By transfer box from the engine of the loader truck through transfer box with pneumatic clutch.

Manometer in glycerin bath located on control panel, for control of hydraulic pressures of both sleeves. Protection system: automatic control valve of maximum hydraulic pressure - water and adjustable pressure for auxiliary sleeve.

Hydraulic fluid reservoir of 100 lts. Construction in sheet steel Siderar F24 (ASTM A-36), general thickness 4mm with built-in breakwater.
Inspection and cleaning nozzles. Loading ports with breather and filter. Drain mouths with lid. Outlets with ball valve. Level display with built-in thermometer. Return filter with 60 micron stainless steel cartridge.

PUMP
Type: Rotary three-cylinder with internal reduction. Normal working flow: 240 lts / min. Normal working pressure: 140 kg / cm2. Normal power absorbed: 90 HP.

SURFACE TREATMENT

Protective and finishing treatment for all non-galvanized surfaces, chromed plastic or stainless. Cleaning, deoxidized, phosphatized and passivized. Application of strontium chromate base antioxidant. Application of two layers of finish with polyurethane enamel. Special epoxy treatment in water tank interior.

OPTIONAL

  • botonHose protection.
  • botonHose extension tubes suction in various lengths.
descarga

CONSULTATIONS FOR THIS PRODUCT

WRITE US, CONTACT US THROUGH THE FOLLOWING FORM AND WE WILL RESPOND YOU AS SOON AS POSSIBLE

CONTACT

OFFICE, PRODUCTION AND SALES
Córdoba-Rosario Km 628,5 highway
5986 Oncativo Córdoba
Phone: +54 3572 462665 ROT.
TECHNICAL SERVICE IN BUENOS AIRES
Dr. Alfredo Palacios 4572 - B1826BLB
Valentín Alsina- Buenos Aires
Phone: +54 11 4228 3096