ECODS 1000/2500

Usage system

Combined equipment for suction and cleaning to be mounted on 4x2 and 6x2 trucks.

Suitable for the clearance, washing and tracing of sewage ducts, domiciliary, rainfall and industrial, by means of sleeve of high pressure and main flow; Pressure and flow controlled auxiliary sleeve, suitable for general washing with adjustable jet / fan range; Suitable for the suction of liquids, mud and objects that can enter the sleeve (Ø 4 "), in the modalities of background and / or surface when counting the system with high flow and high vacuum. The operations can be performed individually and / or simultaneously at full performance.

CONSTRUCTION AND CAPACITIES

Base structure: structural frame, fixed to the truck chassis, which functions as a base for the integration of the equipment.
Located next to the main reel with the following accessories and functions: Pilot command pump and depressor. Truck engine throttle commands. Water control valve.
Speed regulating control. Pressure gauge, water pressure. Base draws current for light work and beacons - capacity 20 A, 250 W. Command work lights and emergency lighting. Emergency stop with interlocking. Lights and work lights controls.

WATER TANK AND POWER SUPPLY CIRCUIT
Volume: 1000 liters, Format: cylindrical with ends of spliced spokes.
Material: Siderar F24 steel plate (ASTM A36), general thickness 1/4 "(6.35 mm). Structural rings of UPN 80 profile, cleaning mouth Ø 500mm, upper and lower interior. Connection for hydrant: Ø 2 ½ "with anti-siphon and ball valve.
Transparent columns for liquid level control, connected to each rear tank. Modules fixed to base frame with elastic elements and supported on rubber pads. Special epoxy treatment dictated inside the module.

PUMP
Type: Rotary three- cylinder with internal reduction. Normal working flow: 70 lts / min. Normal working pressure: 100 kg / cm2. Normal power absorbed: 35 HP. Vacuum Pump 2850 R.P.M. 282 CFM Vacuum 15 "Hg. Maximum empty.

ENERGIZATION AND OLEOHYDRAULIC SYSTEM

Motor of the base truck. Required working power: 65 HP. Power take-off: Transmission Box Interleaved in the transmission of the truck capable of transmitting 100 HP, TER. - Coupling: electro-pneumatic remote control. Triple (transmission and two outputs). Energized system: Three-cylinder Pump Disassembler.

COMMANDS: Remote control, located on the main reel board. Manometer in glycerin bath located on control panel, for control of hydraulic pressures of both sleeves.
Protection system: maximum automatic control valve, flow / pressure regulator.

Transfer case energization with hydraulic pump to gear. Steel fittings and SAE 100 R4 inner hoses 1 "(25.4 mm).

Washable mesh suction filter (60 μm) inside tank with top lid for extraction and cleaning without spills or need for pump power interruption.

Brass ball valve Ø 3/4 "in oil passage for dismantling hydraulic pump.

SURFACE TREATMENT

Deoxidation and phospatization previous to the painting, antioxidant and double final layer with polyurethane varnish, according to manufacturing standard, color at choice.

Double epoxy application inside metallic water tanks (in sheet F24)

OPTIONAL

  • botonHose protection.
  • botonHose extension tubes suction in various lengths.
descarga

CONSULTATIONS FOR THIS PRODUCT

WRITE US, CONTACT US THROUGH THE FOLLOWING FORM AND WE WILL RESPOND YOU AS SOON AS POSSIBLE

CONTACT

OFFICE, PRODUCTION AND SALES
Córdoba-Rosario Km 628,5 highway
5986 Oncativo Córdoba
Phone: +54 3572 462665 ROT.
TECHNICAL SERVICE IN BUENOS AIRES
Dr. Alfredo Palacios 4572 - B1826BLB
Valentín Alsina- Buenos Aires
Phone: +54 11 4228 3096