Usage system
COMBINED EQUIPMENT FOR SUCTION
Mounted on trucks 4x2, 6x2 or 6x4 with adequate capacity of earth load and minimum weight of the equipment, for the maximum payload transported. Suitable for day and night use.
It performs clearance, washing and tracing of sewage, rainwater and industrial pipes, using a hose of Ø3 / 4 "or Ø1" and up to 150 meters in length, with high pressure and flow control.
General wash with auxiliary hose of Ø1 / 2 "and 10 meters in length with adjustable jet lance. From the board adjacent to the main reel, the operations of pump, engine accelerator truck, use of water and handling of the reel (hydropower system) are commanded.
Suction of liquids, mud and objects by suction tower with hose of 150mm (Ø6) or 200mm (Ø8 "). Lifting, turning and extension operations commanded from the workstation (electro-pneumatic system).
Tank of solids with opening of rear door to 50 ° and discharge by gravity with angulation of the tank until in 35 °. Internal tank washing with internal peaks at 60 kg / cm².
COMMANDS
Simple control panel from Cabin by a Joystick-type lever, color display that allows the operator to diagnose operation. Detachable cabinet. Simple diagnostic system and auto test of the equipment.
CONSTRUCTION AND CAPACITIES
Complete structure mounted on a structural base on which it is distributed:
-Front sector: Oil hydraulic reservoir, water pump and according to the suction system, the vacuum pump is fitted with auxiliary motor or transfer case, or the auxiliary motor and turbine with steel casing with superior output and acoustic insulation.
-medium sector: charge capacity from 6 to 10 m³. Reinforced with structural profiles and built in F24 steel plate, rear door with replaceable rubber seals.
Water tanks capacity: 2500 to 5000 liters, according to the corresponding model is made of stainless steel, in sheet of quality F24 and / or rotomolded polypropylene in the form of a supporting backpack bordering the body of load.
-Rear sector: hose reel, adjustable at its point of rotation with adjustable anchors.
Rear bumper adaptable to the equipment. Regulatory side and transit safety lights and strobe beacons.
-Sector under structure: Fenders with antispray screens, drawer storage objects, perimeter security guard and access stairs to perimeter platform.
All assemblies and subassemblies are welded with continuous cord by MigMag system.
ENERGIZATION
OPTIONAL SUCTION SYSTEMS (EMPTY)
-High vacuum with pumps of flow rates from 2000 to 5000CFM. Vacuum from 16 "to 27" Hg column. Power from 90 to 200HP @ 2000RPM. Powered by transfer case or auxiliary motor.
-Vacuum airflow generated by a turbine of 300m³ / min. Vacuum 600mm Hg column. Powered by auxiliary motor and a centrifugal clutch through pulleys and serrated flat belts.
Tricyclical pumps with flow rates from 140 to 240 lts / min. Pressure 140 Kg / cm2. Power up to 89HP. Energized by transfer case or by the auxiliary motor, according to the adopted suction system.
OLEOHIDRAULIC SYSTEM.
Powered from power take-off with hydraulic pump fed from oil tank.
Hydraulic oil piping pipe in seamless steel for high pressure and hoses of quality R17.
Cylinders made of tubes and stems of high quality and resistance, chromed and treated by induction with packing of standard measures and commercial, Parker commercial seals. Manual and / or electronic control valves to operate.
Quality of components approved by ISO9000
SURFACE TREATMENT
Deoxidation and phospatization previous to the painting, antioxidant and double final layer with polyurethane varnish, according to manufacturing standard, color at choice.
Double epoxy application inside metallic water tanks (in sheet F24)
OPTIONALS
Hose protection.- Special nozzles.
- Hose extension tubes suction in various lengths.
- Drinking water tank .
- Cargo tank made of stainless steel.
DIMENSIONS
