ECOLCGS

OPERATION AND TRANSPORTATION VEHICLE

SUITABLE TO OPERATE WITH ALL TYPES OF CONTAINERS ACCORDING TO EUROPEAN STANDARDS.

To integrally wash the containers, once the gate is opened, the containers are elevated inside the back washing hopper and the gate is closed again. Once the washing is finished, the gate is opened and the container is down again in only 30 seconds. The container is completely sterilized through automated or manual cycles.
Container elevator: polyvalent, with from comb-like hook. Twin hydraulic cylinders ɸ76, 2-carr: 400. Maximum pressure: 120 bar.
Possibility to operate simultaneously through:
- Washing cycle time: 8/10 sec.
- Incorporated side sill for loaders
- Upper butt for 100/1100 liters containers.

Commands

Fixed programmed command electronic system at the back side of the device (operating area) and remote control command system for cleaning and maintenance

HOPPER VACUUM PUMP

Pump of 200 liters to load waste water automatically activated.

MACHINE ROOM

System integrated with the body, with lateral ladder where all the hydraulic system, the electronic system and the maintenance cabinet are incorporated.

WASHING BASE

Hydraulic rear lower full opening hatch, for the cleaning of spills from containers already washed

DETAILS OF THE WASHING SYSTEM

- Two vertical parallel robots with auto directed jets by pressure and rotation with four nozzles each, generating a high speed rotation in different directions which reaches all the internal spaces of the container.
- 10 fixed nozzles for external washing located in the laterals and base
- Hosepipe of ½ inches and nozzle to regulate the flow, with a 20 meters reel.

HIGH PRESSURE SYSTEM

Pump with a flow of 140 liters and a pressure of 120 kg. Which is directly activated by a power take off from the gearbox of the chassis (optional crankshaft pump)

TREATMENT AND PAINTING

Cleaning by shot blasting with epoxy painting and dioxide and phosphatizated exterior cover, antioxidant cover and two layers polyurethane varnish.

CONSTRUCTION DETAILS

Built in SIDERSA F20steel plate in the following sizes: lateral elliptical coating, floor with a thickness of 3/16”, internal separators in steel plate with a thickness of 3/16”, front and back studs with a thickness of 1/8. Water bank: chassis 4x2 6000 liters of clean water and 6000 liters of contamined water.
Filling system: through hydrants or by gravity at the top part.

descarga

CONSULTATIONS FOR THIS PRODUCT

WRITE US, CONTACT US THROUGH THE FOLLOWING FORM AND WE WILL RESPOND YOU AS SOON AS POSSIBLE

CONTACT

OFFICE, PRODUCTION AND SALES
Córdoba-Rosario Km 628,5 highway
5986 Oncativo Córdoba
Phone: +54 3572 462665 ROT.
TECHNICAL SERVICE IN BUENOS AIRES
Dr. Alfredo Palacios 4572 - B1826BLB
Valentín Alsina- Buenos Aires
Phone: +54 11 4228 3096