Street washers and watering trucks
Equipment mounted on trucks 4x2 with adequate capacity of earth load and minimum weight of the equipment, for the maximum payload transported.
Washing equipment suitable for high pressure cleaning and disinfection of urban areas, also adapts without any problem to industrial areas, tourist complexes and any place where a high level of hygiene is required.
Wide range thanks to its self-compensating washing hanger system with a turning radius of up to 340 ° and directional "duck-billed" front nozzles from the booth that sweep the floor by means of water pressure forming a high pressure fan.
It has a rear spool with 1/2 "or 3/4" diameter hose and up to 50 meters in length with a hand-held jet spout, with high reach power and maximum working efficiency.
Maximum reach. Simple operating system commanded from inside the truck cab.
CONSTRUCCION AND CAPACITIES
Tank with capacity from 8,000 to 10,000 liters for water. Constructed of 3/16 "(4.76mm) thick carbon steel or fiberglass reinforced plastic (PRFV), semi-elliptical shape with two internal breakwaters. It has a man’s front loading mouth, top bar rail, rear inspection ladder, footrest and general anchors, mudguards with anti - spray screen and rear bumper.
Tool chests with self-compensating doors.
Complete pipe made with galvanized pipes and hoses of metal clasps. Wash hanger and nozzles for each front side. Rear spool. Filters in stainless steel mesh, with high density plastic housing.
Regulatory lights and flashing beacons
System energized from power take-off to oil-hydraulic pump of constant operation fed from oleo hydraulic fluid reservoir.
System energized from gearbox of the carrier truck, with multiplied power take-off and direct transmission tree bar to pump for multi-stage centrifugal ejection.
Flow rate of 120 liters per minute and 15 kg / cm2 of pressure at 1300 RPM.
System fed from an oil hydraulic reservoir, with hose piping of high quality (R17).
Mechanical reel, with 20 kg / cm2 of pressure.
OPTIONAL: Feed system with pump tip and crankshaft.
Tank in steel sheet with cleaning, deoxidized, phosphatized. Application of antioxide and finishing with polyurethane enamel of double application according to standard of manufacture. Color to customer choice. Double epoxy application inside metallic water tanks.
- Anti-spill trays in each man step entrance.
- Tool drawer with lid and lock in stainless steel.
- Water tank washes hands of 25 liters capacity.
- Rear anti-slip feet.