ECOS 26/3

USAGE SYSTEM

EQUIPO SUCCIONADOR CON SISTEMA DE HIDROLAVADO PARA USO EN FORMA INDIVIDUAL

Mounted on semi-trailer with depressed neck of 3 axes with adequate capacity of earth load and minimum weight of the equipment, for the maximum payload transported. Suitable for day and night use. It extracts oiled rods, or their derivatives, with a high vacuum capacity of up to 27 "of Mercury Column. The hydro washes using a hose of Ø1 / 2 "and up to 10 meters in length, high pressure and flow controlled; with the possibility of increasing the water temperature to 90 ° C by means of a thermostat incorporated in the control panel. The system has two adjustable jet lances.
It performs suction of liquids and / or muds by the suction tower with hose of 200mm (Ø8 "). Lifting, turning and extension operations commanded from the workstation (electro-pneumatic system). From the main board, operations of water pump, motor accelerator and suction tower movements are commanded. It also has the option of incorporating wireless control to control these commands remotely.
Tank of solids with opening of rear door to 50 ° and discharge by gravity with angulation of the tank until in 35 °.

Construction and capacities

Complete structure mounted on a semi-trailer in which it is distributed:
- Front: Tank of oil hydraulic fluid, water pump and boiler, the vacuum pump is arranged with its corresponding air filtering system and the auxiliary motor that energizes it.
- Medium and Rear: Cargo tank in capacity from 26m³, reinforced with structural profiles and breaks waves, built in sheet steel F24, back door with replaceable rubber seals.
-Sector Superior: It has a system of perimeter rails, which allow reaching the sectors of suction tower and fluid intake to the tank.
Water tank with capacity for 3000 liters, which is made in stainless steel, in sheet quality AISI 304.
Rear bumper adaptable to the equipment, elevated optimizing the hygiene of the same.
Regulatory side and transit safety lights and strobe beacons.
-Structured structure: Fenders with anti-spatter screens, drawer storage objects and access stairs to perimeter platform.
All assemblies and subassemblies are welded with continuous cord by MigMag system.

ENERGIZATION AND OLEOHIDRAULIC SYSTEM

SUCTION SYSTEMS (EMPTY)
-High vacuum with bilobular pumps of flow rates from 4000 to 5000CFM. Vacuum up to 27 "Hg column. Power from 100 to 200HP @ 2000RPM. Powered by auxiliary motor.

WASHED HYDRO SYSTEM WITH BOILER
Rotary pump with three cylindrical flow rate 21lts / min. Working pressure 180 kg / cm² maximum 200 kg / cm². Power up to 10HP. Powered by oleo hydraulic motor.

OLEOHIDRAULIC SYSTEM.
Energized with two oil hydraulic pumps from PTO and auxiliary motor respectively.
Hydraulic oil piping pipe in seamless steel for high pressure and hoses of quality R17.
Cylinders made of tubes and stems of high quality and resistance, chromed and treated by induction with packing of standard measures and commercial, Parker commercial seals. Manual and / or electronic control valves to operate.

SUPERFICIAL TREATMENT

Cleaning, deoxidized, phosphatized and passivized. Anti-oxide and finishing with polyurethane enamel of double application according to standard of manufacture. Color to customer choice.
Epoxy treatment inside water tank.

OPTIONAL

  • botonHose protection.
  • botonHose extension tubes suction in various lengths.
descarga

CONSULTATIONS FOR THIS PRODUCT

WRITE US, CONTACT US THROUGH THE FOLLOWING FORM AND WE WILL RESPOND YOU AS SOON AS POSSIBLE

CONTACT

OFFICE, PRODUCTION AND SALES
Córdoba-Rosario Km 628,5 highway
5986 Oncativo Córdoba
Phone: +54 3572 462665 ROT.
TECHNICAL SERVICE IN BUENOS AIRES
Dr. Alfredo Palacios 4572 - B1826BLB
Valentín Alsina- Buenos Aires
Phone: +54 11 4228 3096