WATERING TRUCKS ECOTROS

Usage system

WATERING TRUCKS

Equipment mounted on trucks 4x2, 6x2 or 6x4, with adequate capacity of earth load and minimum weight of the equipment, for the maximum payload transported.

Suitable for intensive day and night irrigation of asphalt, dirt or gravel roads, rural roads, access to industrial establishments, beaches of trucks, as well as for fire extinguishing, loading and supply of drinking water.
Ventral loading system 3 ", rear discharge with 4" lower valve. Circuit of water made of pipe and galvanized accessories threaded and dismantled. 76.2mm (3 ") metal back barrel with two irrigation flowers built in gray cast iron, cylinders and bronze lid.
Irrigation width up to 10 meters.
Pneumatic controls for power valve and irrigation located in truck cab within reach of the driver.
Pollution: reduced by low noise level and emanation of engine gases, due to the low engine rotation 1400RPM, general level 70db.

CONSTRUCTION AND CAPACITIES

Elliptical or cylindrical body cistern built in SAE1010 4,76mm (3/16 ") sheet steel and shaped shells of the same thickness at both ends. Lower crossbars as a base structure. Designed for capacities of 16,000 / 18,000 liters. It has three transverse breakwaters in sheet steel SAE1010 3.2 mm (1/8 ") that give the robustness necessary to withstand the stresses generated by the moving liquid. It has a 500mm diameter aluminum loading mouth in the upper zone surrounded by a non-spill tray, three water level indicators in the rear cap, rear staircase, tool drawer with cover and stainless steel lock, water tank washes hands of 25 liters of capacity. Side hose in stainless steel spout (both sides), non-slip rear footrests and fenders in stainless steel type American.
Electric and internal welding with MigMag system.
Electrical installation type (anti-explosive) with corrugated pipes and regulation lights dual side for day and night work.

ENERGIZATION

System energized from PTO pneumatic drive
Composition of centrifugal pump of 5Kg / cm2 of pressure and yield of 35.000Lts / h of clean water that crosses the circuit of water.

SURFACE TREATMENT

Degreasing, pickling and phosphatizing.
Painted externally with two hands of common epoxy, anticorrosive and double application of polyurethane paint, and color to choice of the client.

OPTIONAL

  • botonSuction equipment by means of 2 "plastic hose.
  • botonPumping equipment: IRAM fabric hose, with bronze couplings and full jet spout (fire system).
  • botonLava Streets: front duck peaks, high pressure pump, steerable wash tower.
descarga

CONSULTATIONS FOR THIS PRODUCT

WRITE US, CONTACT US THROUGH THE FOLLOWING FORM AND WE WILL RESPOND YOU AS SOON AS POSSIBLE

CONTACT

OFFICE, PRODUCTION AND SALES
Córdoba-Rosario Km 628,5 highway
5986 Oncativo Córdoba
Phone: +54 3572 462665 ROT.
TECHNICAL SERVICE IN BUENOS AIRES
Dr. Alfredo Palacios 4572 - B1826BLB
Valentín Alsina- Buenos Aires
Phone: +54 11 4228 3096