EQUIPO SUCCIONADOR DE POLVOS CON ALTO PESO ESPECIFICO.
Mounted on truck 4x2, with adequate capacity of earth load and minimum weight of the equipment, for the maximum payload transported. Suitable for day and night use.
Equipment designed for the extraction of mineral or high specific gravity powder with capacity to suction matter in the dry or wet state.
Extraction of material to be cleaned by means of a suction tower equipped with the ability to rotate on its axis, raise or lower and extend or collect.
Gravity discharge system, articulating the tank up to 45º, equipped with a gate that allows to perform the operation. This system is provided by a seal that guarantees the tightness of the assembly.
CONSTRUCTION AND CAPACITIES
Complete structure mounted on a structural base in which it is distributed:
- Front section: Oil hydraulic reservoir, vacuum pump controlled by a transfer case, air filtration system for double separation of particles; This consists of an element that centrifuges the air flow separating the particles, then the previously filtered fluid enters a room with separation filters whose total surface exceeds 435 ft2, these are self-cleaning by means of an electronically managed reverse air pulse.
- Medium / rear: Cargo tank with capacity for 10m3, reinforced with structural profiles and built in sheet steel F24, back door with replaceable rubber seals.
Rear bumper adaptable to the equipment. Regulatory side and transit safety lights and strobe beacons.
-Sector Low structure: antispray Fenders with screens, pedestals keeps objects and stairs to platform perimeter.
All assemblies and subassemblies are welded with continuous cord by MigMag system.
ENERGIZATION AND OLEOHIDRAULIC SYSTEM
SUCTION SYSTEMS (EMPTY)
-High vacuum with bilobular pump whose flow rate is 5420CFM. Vacuum 28 "Hg column. Power of 200HP @ 2000RPM. Powered by transfer case.
Powered from power take-off with hydraulic pump fed from oil tank.
Hydraulic oil piping pipe in seamless steel for high pressure and hoses of quality R17.
Cylinders made of tubes and stems of high quality and resistance, chromed and treated by induction with packing of standard measures and commercial, Parker commercial seals. Manual and / or electronic control valves to operate.
Cleaning, deoxidized, phosphatized. Antioxidant and finishing with enamel polyurethane of double application according to standard of manufacture. Color to customer choice.