SYSTEM OF USE
Automated side loading bin washer
Equipment for mounting on trucks 4x2 or 6x2 with adequate capacity of earth load and minimum weight of the equipment for the maximum payload transported.
Suitable for day and night service of washing of solid urban waste containers.
Handles metal containers from 1000 to 1100 liters (DIN) and plastics 2400 and 3200 liters (UNI EN). Automatic system for holding, loading and unloading through robot arms external to the washing chamber. It has control sensors for the anchoring of the container and opening of the lid granting maximum precision.
Washing chamber with opening and closing shutters of movements synchronized with the loading system in order not to affect wash cycle times.
Washed by high-pressure hot water for flow rates up to 50 lts / min. With 160 bar and cold water for 100 lts / min with 160 bar.
Fully automated system through a robot equipped with two self-tapping heads supported by a structure driven by jack. The exterior of the container is washed by four bars with oscillating movement, and optionally by translation. It has a tank for dirty water with a discharge valve on the side of the equipment. Excellent hydraulic performance avoiding the overheating of the oil and the consequent prolongation of the life of all the hydraulic components.
CONSTRUCTION AND CAPACITIES
The design phase with great detail and care of TECME has allowed to build a machine with dimensions for the maximum operational use.
Water tank: composed of three cisterns, two outer longitudinal for clean water and an internal longitudinal for dirty water recovery. Made in stainless steel AISI 304 for all parts in contact with water, with a uniform thickness of 3 to 4 mm. totally watertight compartments. Man's mouths of 420 mm diameter, watertight seal and quick opening. Capacity from 5,000 to 10,000 liters of water.
Washing chamber: Fully built in AISI 304 and 303 stainless steel with metal side seals for excellent sealing. Filtration grids in lower zone and in the sides guaranteeing the complete suction of dirty water. Waste discharge door with extension for the whole length of the chamber.
Container intake system, made of stainless steel AISI 304 and 303, with the exception of hydraulic cylinders. Located on the right or left side of the vehicle. Handles metal containers from 1000 to 1100 liters (DIN) and plastics up to 3200 liters (UNI EN).
Rear cabinet made of galvanized steel, which protects the group of valves to drive the equipment.
The commands for the control and operation of the machine are simple, reliable and intuitive.
A touch screen panel is provided in the truck cab to control the handling and washing of the equipment, with performance verification control and integral equipment diagnosis.
The panel includes customizable monitors, fast and accurate, linked to 5 cameras that allow the visual control of all movements.
Ergonomic design so that it does not compromise in any way the visibility, the driving and the movements of the driver.
General Movements of the equipment
Energized from gearbox of the carrier truck, with power take-off and direct cardan bar to tandem hydraulic pump of two bodies 120/60 liters / min at 2000rpm.
Powered from oil hydraulic fluid reservoir, with hose piping of high quality.
High pressure water pump of 102 Liters / min. Maximum pressure 180 bars.
Rotary dirty water pump actuated by hydraulic motor. Variable flow with a maximum of 200 liters / min.
Pneumatic valve block, equipped with filtration and lubrication system.
The lateral load washing equipment is a machine that offers the TECME Company within its range. As always we are in the market marking the quality of the product, highlighting its comfort of use, detail attention and customer service, with quick answers.
Reduced pollution due to low noise and emanation of engine gases, due to the low and controlled rotational engine speed, thus reducing the emission of gases and engine noise.