ECO ANDRES 17/21

SYSTEM OF USE

Equipment for 4x2 or 6x2 truck loading.

Suitable for day and night service of urban solid waste collection, by manual, mechanized or mixed loading methods, in position loading hopper and rear access.
Handles containers of up to 2m³ and performs a combined compaction in two stages by rotating / wraparound movement compactor and wrapping truck wrapping upward oblique movement, which compacts in a nearly horizontal direction forward; Trajectory achieved by parallelogram deformable constituted by four arms, without guides and without skids.

Unloading with opening and lifting of the rear hopper by means of an ejector of linear movements backwards.

System activated by levers of manual control and / or electronic automation from the equipment, with automatic stop of security.

CONSTRUCTION

Complete structure with capacity from 17m3 to 24m³.
Box of load and compaction type self-supporting, entirely built in structural profiles and sheet steel F24 in general thickness. Side and roof coatings with curved semi-elliptical panels and constructive reinforcements. Ejector blade with lateral centering guides and polyamide skids.
Load hopper of 2.3m³ capacity. Conformed by a side body with outer structural cross-link, loading edge and hopper bottom. Compactor shovel and cart wrapping machine tied inside. All components in sheet steel of high resistance and quality, specially dimensioned that support the conditions of collection.
All assemblies and sub-assemblies welded in continuous cord by semi-automatic MIGMAG system.

ENERGIZATION AND OLEOHIDRAULIC SYSTEM

Depending on the configuration of the equipment, the system is energized from power take-off and constant-duty pump fed from oil-hydraulic power tank or crankshaft tip pump.
Hydraulic Hose Piping Hose of High Quality (R17)
Cylinders made of tubes and stems of high quality and resistance, chromed and treated by induction
Manual and / or electronic control valves.

SURFACE TREATMENT

Cleaning, phosphating and passivation of surfaces, application of antioxide base to strontium chromate and two layers of polyurethane enamel finish.

BENEFITS

Hopper 2.3m³ - Excellent load hopper volume ratio.
Special design of tilting cranks (without skids), for high performance by reduction of friction and minimum maintenance (only grease).
Loading / unloading: low hopper edge height.

IMAGE GALLERY

galeria-01-andres17

ACCESSORIES

Lights: regulation lights (down and upper), amber flashing lights, and night operation lights at loading area.

OPTIONAL

  • botonCrankshaft tip pump.
  • botonAutomated compaction system by means of electronic controls.
  • botonLift multi-purpose container.
  • botonContainer lifts combined.
  • botonIt lifts container type winch up to 5 mts³.
  • botonDeposit of containers washer.

descarga

 

DIMENSIONS

ecoandres2-dimensiones

CONSULTATIONS FOR THIS PRODUCT

WRITE US, CONTACT US THROUGH THE FOLLOWING FORM AND WE WILL RESPOND YOU AS SOON AS POSSIBLE

CONTACT

OFFICE, PRODUCTION AND SALES
Córdoba-Rosario Km 628,5 highway
5986 Oncativo Córdoba
Phone: +54 3572 462665 ROT.
TECHNICAL SERVICE IN BUENOS AIRES
Dr. Alfredo Palacios 4572 - B1826BLB
Valentín Alsina- Buenos Aires
Phone: +54 11 4228 3096